Fargo DTC400e - Page 343

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e Card Printer User Guide (L001172 Rev. 1.1) 12-4
ISO Track Locations, 6-65
J
JIS C 6220 Type II cards, 6-48
JIS II (Japanese Industrial Standard), 11-10
K
K Panel, 11-10
K Panel Resin options, 6-82, 6-106
K Panel Resin tab, 6-96
L
Lamination, 11-10
Lamination Sensor Calibration, 4-55
LAN (Local Area Network), 11-10
Landscape, 11-11
Landscape orientation, 6-42
LCD (Liquid Crystal Display), 11-11
LED (Light Emitting Diode), 11-11
less heat / more heat, 6-39
LoCo (Low Coercivity), 11-11
Low Coercivity, 6-54
LPT Port (Line Printer Port), 11-11
M
magnetic data, 6-119
Magnetic Encoder, 4-16
Magnetic encoding, 11-11
Magnetic Encoding tab, 6-47
Magnetic Offset option, 6-119
Magnetic Offset value, 6-119
Magnetic stripe, 11-11
Magnetic Stripe Encoding Modules, 6-48
Magnetic Stripe encoding process, 6-47
Magnetic Stripe reader, 4-13
Magnetic Track, 11-11
Magnetic Track data, 6-66
Magnetic Track Options, 6-56
Magnetic Track Selection, 6-54
Magnetic Verify, 11-11
maximum adjustment range, 6-114, 6-119
MB (Megabyte), 11-12
Media, 11-11
Memory, 2-3, 11-12
Menu, 11-12
Metallic Resin, 2-8
Monitor, 6-29
Monochrome, 11-12
Monochrome Dye-Sub (B), 4-55
Monochrome Resin (K), 4-55
N
Network, 11-12
None, 6-29
O
Oersted (Oe), 11-12
Offset, 11-12
Omit Signature Area setting, 6-79
On LED, 4-54, 4-56
onscreen card design, 6-102
Operating Temperature, 2-3
O-Ring, 11-12
OS (Operating System), 11-12
Output, 11-12
Output Hopper, 11-12
Overlaminate, 11-13
Overlay, 11-12
Overlay / Print Area, 6-79, 6-80
Overlay / Print Area options, 6-76
Overlay / Print Area tab, 6-70
Oversized Cards, 11-13
P
Parallel, 11-13
Parallel port, 11-13
Pause button and LED, 2-6
Pause/Resume button, 4-54, 4-56
PC (Personal Computer), 11-13
PCB (Printed Circuit Board), 11-13
Peel, 11-13
Peel-Off, 11-13
Peripheral, 11-13
PET, 11-14
Photo, 6-30
Pinch Roller, 11-14
Pixel, 11-14
Platen, 11-14
PolyGuard Overlaminate, 11-14
poor image quality problems, 4-50, 4-51, 4-52
Port, 11-14
Portrait, 11-14
Portrait or Landscape, 6-3
Portrait, Landscape or Rotate 180 Degrees, 6-42
positive / negative Print Length value, 6-114
POSITIVE / NEGATIVE value., 6-113
Potentiometer, 11-14
Power Port, 2-6
power/data cables, 4-34
Premium Resin Black (K), 2-8
Print All Black With K Panel, 6-96
print and overlay, 6-70
Print Back Side First option, 6-33
Print back side only, 6-34
print both sides, 6-31, 6-32
Print Both Sides option, 2-12, 6-32, 6-34
Print Driver, 11-14
Print Job, 11-14
Print K Only options, 6-107, 6-109, 6-110, 6-115, 6-
117, 6-118, 6-121
Print Length option, 6-114
Print Method, 2-3
Print Ribbons, 2-7
Print Server, 11-14
print the first page of a two-page document, 6-33