Software Control: Microscope Control Software
C O N F I D E N T I A L – FEI Limited Rights Data3-38
23. Alignments Module
contains alignments which enable to optimize the system
performance (see Chapter 4).
The list box contains list of Alignment procedures available for
the actual user level (user or a FEI authorized service engineer).
Caution!
A user must understand the procedures at the appropriate level
before proceeding with any adjustment. Improper alignments can
make the system difficult to use.
Note
Some alignment modules may have some features distributed
differently than others, but functionality is the same, if it is not
mentioned.
To Next Page
Loading...
