Fibocom G510 - Page 138

G5/G6-Family AT Commands User Manual Page
138
of
243
Note3: MT may also update the User controlled PLMN selector with Access Technology list -
EFPLMNwAcT, automatically when new networks are selected.
Note4: The Operator controlled PLMN selector with Access Technology EFOPLMNwAcT and HPLMN
selector with Access Technology - EFHPLMNwAcT cannot be written since the access conditions is
Administrative.
Note5: The command is implemented according to 3GPP TS 27.007 without acceptance in attention the
<GSM_AcT2>, <GSM_Compact_AcT2>, <UTRAN_AcT2>] bits since the Module device not using this
bits to get the best PLMN.
Example:
AT+CPOL=?
+CPOL: (1-32),(0-2)
OK
AT+CPOL?
+CPOL: 0,2,"42501"
OK
AT+CPOL=,0
OK
AT+CPOL?
+CPOL: 0,0,"IL ORANGE"
OK
AT+CPOL=?
+CPOL: (1-32),(0-2)
OK
AT+CPOL=1,2,"42502"
OK
AT+CPOL?
+CPOL: 0,0,"IL ORANGE"
+CPOL: 1,0,"IL Cellcom"
OK
AT+CPOL=1
OK
AT+CPOL?
+CPOL: 0,0,"IL ORANGE"
OK