Fibocom G510 User Manual

G5/G6-Family AT Commands User Manual Page
23
of
243
or:
+CME ERROR: <err>
of information responses and result
codes.
The following table shows the V parameters.
<Parameter>
Description
<value>
0 Transmits limited headers and trailers, and numeric text.
1 Transmits full headers and trailers, and verbose response text.
The default value is 1.
Example:
ATV0
0
ATV1
OK
4.1.2 Q, Result Code Suppression
This command determines whether to output the result codes. Information text transmitted in response to
commands is not affected by the setting of this parameter.
Command
Syntax
Response/Action
Remarks
Set
ATQ<value>
OK
or:
+CME ERROR: <err>
The set commands sets whether or
not to output result codes.
Read
ATQ?
Q: <value>
OK
The following table shows the parameters.
<Parameter>
Description
<value>
0 Transmit result codes.
1 Suppress result codes.
The default value is 0.

Fibocom G510 Specifications

General

Brand	Fibocom
Model	G510
Category	Modem
Language	English