Fibocom G510 User Manual

G5/G6-Family AT Commands User Manual Page
75
of
243
6 Phone and Date Books and Clock
6.1 Directory Access Commands - Phone Book
This set of commands enables read/write access to the phone book contained within the Module,
including both the numeric and the alpha information contained in the location. The presentation is
according to GSM 07.07.
In some cases, it may be possible to use these commands to access the dialed and received call stacks.
However, as these phone books cannot be edited, the +CPBW command does not work on them.
6.1.1 +CPBS, Select Phone Book Memory
6.1.2 This command handles the selection of the memory to be used
for reading and writing entries in the Module’s phone book’s
memory.
Command
Syntax
Response/Action
Remarks
Set
AT+CPBS=<storage>[,<
pin2>]
<pin2>is optional while
<storage> = "FD" only
OK
or:
+CME ERROR:
<err>
The Set command selects the phone
book memory storage which is to be
used by other phone book
commands.
Read
+CPBS?
+CPBS:
<storage>
[,<used>,<tot
al>]
OK
The Read command returns the
currently selected phone book
memory, number of used entries and
total number of entries in the phone
book memory.
Test
+CPBS=?
+CPBS: (list of
supported<storag
e>s)
OK
Test command returns the supported
storage as a compound value.
Note: Read format of +CPBS joins RC and MC, therefore the united list will be prompted.
The following table shows the +CPBS parameters.
<Parameter>
Description
<storage>
List of supported phone books and their storage IDs

Fibocom G510 Specifications

General

Brand	Fibocom
Model	G510
Category	Modem
Language	English