Fibocom G510 User Manual

G5/G6-Family AT Commands User Manual Page
13
of
243
Figure 2-1 Unsolicited results code
2.4 AT Commands Structure
2.4.1 General Symbols Used in AT Commands Description
The following syntax definitions apply in this chapter:
Syntax
Definition
<CR>
Carriage returns character, specified by the value of the S3-register.
<LF>
Line-feed character, specified by the value of the S4-register.
<…>
Name enclosed in angle brackets is a syntax element. The brackets themselves
do not appear in the command line.
[...]
Optional sub-parameter of a command or an optional part of terminal
information response, enclosed in square brackets. The brackets themselves
do not appear in the command line. When the sub-parameter is not provided in
the parameter type commands, the new value equals its previous value. In
action type commands, the action should be performed on the basis of the
recommended default setting of the sub-parameter.
//
Denotes a comment, and should not be included in the command.
2.4.2 Command Structure
Each AT command has the "AT" or “at” prefix string (except the commands A/ and +++).
Each AT command has the suffix <CR> (except the commands A/ and +++).
TE
TA (G5xx/G6xx)
Command
Results code
TE
TA (G5xx/G6xx)

Fibocom G510 Specifications

General

Brand	Fibocom
Model	G510
Category	Modem
Language	English