Fibocom G510 User Manual

G5/G6-Family AT Commands User Manual Page
41
of
243
book entry. The used character set should be the one selected with Select
Terminal Character Set +CSCS. <alpha> is case-sensitive, and should be
placed in quotes ("alpha").
<n>
This parameter is also called "speed dial location". It is an integer type
memory location. <n> should be in the range of locations available in the
memory used.
<"mem">
This parameter is not case-sensitive.
Example:
AT+CPBS="SM"
OK
AT+CSCS="IRA"
OK
AT+CPBW=1,"035659090",129,"VoiceMail"
OK
AT+CPBR=1
+CPBR: 001,"035659090",129,"VoiceMail"
OK
atd>”VoiceMail”; //Phonebook by name
OK
OK
ath
NO CARRIER
OK
5.1.3 DL, Dial Last Number
The DL command places a voice call to the last number dialed. The call progress information
(success/failure) is reported in the same way as for the Dial command.
Command
Detailed Description
ATDL[;]
Initial Response - Last Number retrieved:
ATDL: <DIAL DIGITS>
1st response - Voice call placement begins
OK
2nd response - Voice call connected OK

Fibocom G510 Specifications

General

Brand	Fibocom
Model	G510
Category	Modem
Language	English