Fibocom G510 - CGREG, GPRS Network Registration

G5/G6-Family AT Commands User Manual Page
131
of
243
5 Registered, roaming.
<lac>
Two-byte location area code in hexadecimal format.
<ci>
Two-byte cell ID in hexadecimal format.
Example:
AT+CREG=?
+CREG: (0-2)
OK
AT+CREG?
+CREG: 0,1
OK
AT+CREG=2
OK
AT+CREG?
+CREG: 2,1,"27A0","0DE1"
OK
AT+CREG=1
OK
AT+CREG?
+CREG: 1,1
OK
AT+CREG=0
OK
9.1.3 +CGREG, GPRS Network Registration
Command
Syntax
Response/Action
Remarks
Set
AT+CGRE
G=<n>
OK
or:
+CME ERROR: <err>
The Set command controls the
presentation of an unsolicited result code
"+CGREG: " and the result of the Read
operation.
Read
AT+CGRE
G?
+CGREG:
<n>,<stat>[,<lac>,<ci>]
OK
The Read command returns the status of
the result code presentation and shows
whether the network has currently
indicated the GPRS registration of the
Module. Location information elements