Need help?Do you have a question about the Fibocom G510 and is the answer not in the manual?
Restores the factory default configuration profile, supporting only profile 0.
Drops current call and resets values to default configuration.
Saves the active profile to one of two user profiles.
Provides limited access to Elementary Files on the SIM card, restricted to specific commands.
Enables/disables the use of +CME ERROR result code for module-related errors.
Places a VOICE call on the current network. Call type is a voice call.
Hangs up a call, terminating voice or data calls. A NO CARRIER message is returned.
Answers an incoming VOICE call after a RING/+CRING indication. Sends CONNECT notification.
Controls Call Hold and Multiparty Conversation services for voice calls.
Enables control of call-forwarding supplementary service (registration, erasure, activation, deactivation).
Handles selection of the memory to be used for reading and writing entries in the module's phone book.
Recalls phone book entries from a specific entry number or a range of entries.
Searches for a particular entry by name in the currently active phone book.
Stores a new entry or edits/deletes an existing entry in the phone book.
Reads and sets the module's current date, time, and time zone.
Restores the factory default configuration profile, supporting only profile 0.
Drops current call and resets values to default configuration.
Saves the active profile to one of two user profiles.
Provides limited access to Elementary Files on the SIM card, restricted to specific commands.
Enables/disables the use of +CME ERROR result code for module-related errors.
Places a VOICE call on the current network. Call type is a voice call.
Hangs up a call, terminating voice or data calls. A NO CARRIER message is returned.
Answers an incoming VOICE call after a RING/+CRING indication. Sends CONNECT notification.
Controls Call Hold and Multiparty Conversation services for voice calls.
Enables control of call-forwarding supplementary service (registration, erasure, activation, deactivation).
Handles selection of the memory to be used for reading and writing entries in the module's phone book.
Recalls phone book entries from a specific entry number or a range of entries.
Searches for a particular entry by name in the currently active phone book.
Stores a new entry or edits/deletes an existing entry in the phone book.
Reads and sets the module's current date, time, and time zone.
General| Power Supply | 3.3V to 4.3V |
|---|---|
| Operating Temperature | -40°C to +85°C |
| Type | Cellular Module |
| Supported Bands | GSM: 850/900/1800/1900MHz |
| Cellular Technology | GSM |
| Voice | VoLTE |
| GNSS | GPS, GLONASS, BeiDou, Galileo |
| Certifications | CE, FCC, GCF, RoHS |
| Interface | UART |
To Next Page
