Fibocom G510 - GTPLMNLS, Clear Arfcn List

G5/G6-Family AT Commands User Manual Page
151
of
243
9.1.15 +GTPLMNLS, Clear Arfcn list
This command allows to Clear Arfcn list and PLMN from nv,that the Arfcn and PLMN is saved after the last
register network. So the time of register network is longer after clear Arfcn and PLMN.
Command
Syntax
Response/Action
Set
AT+GTPLMNLS=n
OK
or
CME ERROR: <err>
Read
AT+GTPLMNLS?
[SIM0]PLMN:
[SIM0]COUNT:
[SIM0]ARFCN:
[SIM1]PLMN:
[SIM1]COUNT:
[SIM1]ARFCN:
OK
Test
AT+ GTPLMNLS =?
ERROR
PLMN is MCC and MNC; COUNT is number of frequency points; ARFCN is frequency points
The following table shows the +GTPLMNS parameters.
<Parameter>
Description
n
1
Clear Arfcn list and PLMN of SIM1 from nv
2
Clear Arfcn list and PLMN of SIM2 from nv
Example:
AT+GTPLMNLS?
[SIM0]PLMN:64,f0,10
[SIM0]COUNT:19
[SIM0]ARFCN:637,644,645,647,648,649,650,655,658,660,662,665,100,109,112,120,121,124,6
56,0,0,0,0,0,0,0,0,0,0,0,0,0,0
[SIM1]PLMN:0,0,0