Fibocom G510 User Manual

G5/G6-Family AT Commands User Manual Page
133
of
243
+CGREG: 002,001,2648,988b
OK
AT+CGREG=1
OK
AT+CGREG?
+CGREG: 001,001
OK
AT+CGREG=0
OK
9.1.4 +COPS, Operator Selection
This command enables accessories to access the network registration information, and the selection and
registration of the GSM network operator. The Module is registered in the Home network.
The Enhanced Operator Name String (EONS) feature enables the Module to return the operator name
displayed on the handset. This feature allows the SIM card to store a mapping of MCC/MNC code pairs to
the displayed operator name. As a result, several operators can share a single network while having their
handsets display their own name as the network operator.
Testing the enhanced ONS feature requires a "SIM ONS" SIM card.
Command
Syntax
Response/Action
Remarks
Set
AT+COPS=[<m
o
de>[,<format>
[,<oper>]]]
OK
or:
+CME ERROR:
<err>
The Set command can force an attempt to
select and register a specific GSM network
operator. The <mode> selects whether this is
done automatically by the Module or whether
the selection is forced to an operator <oper>
(given in format <format>). If the selected
operator is not available, no other operator is
selected (except when the <mode> is set to 4).
<mode>=2 forces an attempt to deregister from
the network.
<mode>=3 sets the operator format to all further
Read commands (+COPS?) as well.
The selected mode applies to future network
registrations, for example, once you deregister
from the network, the Module remains
unregistered until you select <mode>=0,
<mode>=1, or <mode>=4

Fibocom G510 Specifications

General

Brand	Fibocom
Model	G510
Category	Modem
Language	English