Fibocom G510 User Manual

G5/G6-Family AT Commands User Manual Page
85
of
243
OK
Test
+CMGF=?
+CMGF: (list of
supported mode>s)
OK
The Test command lists all the
supported message formats.
The following table shows the +CMGF parameters.
<Parameter>
Description
<mode>
Message format:
0 PDU mode (default)
1 Text mode
Example:
AT+CMGF=1
OK
AT+CMGF?
+CMGF: 1
OK
AT+CMGF=?
+CMGF: (0,1)
OK
7.1.3 +CSCA, Service Center Address
This command enables to write/read SCA to/from SIM.
7.1.4 In SMS text mode, SCA stored in SIM is added to any stored
and sent SMS.
In SMS pdu mode, SCA stored in SIM is added to stored SMS and send SMS only when SCA address
length coded in PDU equals zero.
Command
Syntax
Response/Action
Remarks
Set
+CSCA=<sc
a>[,<tosca>]
OK
or:
+CMS ERROR:
<err>
Sets service center address stored in SIM
(EF-SMSp -Short message service
parameters). <tosca> is optional parameter,
default value is 129 (local number). When
<sca> is prefixed with ‘+’ it indicates that

Fibocom G510 Specifications

General

Brand	Fibocom
Model	G510
Category	Modem
Language	English