Fibocom G510 - MSMPD, Enable;Disable SIM Card Hot Plug

G5/G6-Family AT Commands User Manual Page
169
of
243
10.1.14 +MSMPD, Enable/Disable SIM Card Hot Plug
This command can Enable/Disable SIM card hot plug feature. The default status is disable this feature.
The parameter will be saved in profile and can restore at power cycle.
Command
Syntax
Response/Action
Remarks
Set
AT+MSMPD=< status>
OK
Or:
+CME ERROR: <err>
Enable/Disable SIM
card hot plug
Read
AT+MSMPD?
+MSMPD: <status>
OK
Read the current
status
Test
AT+MSMPD=?
+MSMPD: (0-1)
OK
The following table shows the +MSMPD parameters.
<Parameter>
Description
<status>
0: Disable the SIM card hot plug feature
1: Enable the SIM card hot plug feature
The default value is 0
Notes: This feature need HW support.
Example:
AT+MSMPD=?
+MSMPD: (0-1)
OK
AT+MSMPD=1
OK
AT+ MSMPD?
+MSMPD: 1
OK