Fibocom G510 - Page 168

G5/G6-Family AT Commands User Manual Page
168
of
243
ERROR
Read
+WRIM?
+WRIM: <type>,<width>
OK
or:
ERROR
The read command returns the current
parameter of RI pin.
Test
+WRIM=?
+WRIM: <type>,<width>
OK
or
ERROR
The test command displays the list of
supported <type> and <width> values.
The following table shows the +WRIM parameters.
<Parameter>
Description
< type >
0: make effective on Call
1: make effective on SMS
<width>
0: default value. // (0,1000) and (1,150)
1～2000: 1～2000ms
Example:
AT+WRIM=?
+WRIM: (0-1),(0-2000)
OK
AT+WRIM=1,1000
OK
AT+WRIM?
+WRIM: 0,1000
+WRIM: 1,1000
OK