Fibocom G510 - CNMI, New Message Indications to Terminal

G5/G6-Family AT Commands User Manual Page
92
of
243
OK
AT+CMGR=160// SMS-SUBMIT
+CMGR: "STO UNSENT","0544565034",
ABC
OK
AT+CSDH=1
OK
AT+CMGR=160
+CMGR: "STO UNSENT","0544565034",,81,29,0,0,"04/11/04,09: 48:
36+08","+97254120032",145,3
ABC
OK
7.1.7 +CNMI, New Message Indications to Terminal
This command handles enabling of unsolicited notifications to the terminal when an SM is received by the
Module.
After sending an unsolicited response to the TE, the Module will expect a +CNMA (new message
acknowledge) from the TE within a predefined timeout of 60 seconds. The Module will not send another
unsolicited response to the TE before the previous one is acknowledged. If acknowledged within the
timeout, the new SM is not saved in the message storage. If not, the new SM is saved in the message
storage and +CNMI parameters are set to 0.
Command
Syntax
Response/Action
Set
+CNMI=[<mode>[,
<mt>[,<bm>[,<ds>[
,<bfr>]]]]]
OK
or:
+CMS ERROR: <err>
Read
+CNMI?
+CNMI: <mode>,<mt>,<bm>,<ds>,<bfr>
OK
Test
+CNMI=?
+CNMI: (list of supported <mode>s), (list of supported
<mt>s), (list of supported <bm>s), (list of supported
<ds>s), (list of supported <bfr>s)
OK