Fibocom G510 - S94, Sidetone Effect

G5/G6-Family AT Commands User Manual Page
176
of
243
state.
Test
+CMUT=?
+CMUT: (list of
supported <state>s)
OK
The Test command returns the
possible <state> values.
The following table shows the +CMUT parameters.
<Parameter>
Description
<state>
0 Unmute microphone path (default)
1 Mute microphone path
Example:
AT+CMUT=?
+CMUT:(0-1)
OK
AT+CMUT?
+CMUT: 0 //uplink voice is unmuted
OK
AT+CMUT=1 //uplink voice is muted
OK
AT+CMUT?
+CMUT: 1
OK
AT+CMUT =2
+CME ERROR: <err>
11.2.4S94, Sidetone Effect
This command reduces the microphone audio input that is routed to the selected speaker, so that people
speaking will hear themselves talking.
Command
Syntax
Response/Action
Remarks
Set
ATS94=<n>
OK
or:
+CME ERROR:
<err>
The Set command sets the sidetone
status.