Fibocom G510 User Manual

G5/G6-Family AT Commands User Manual Page
83
of
243
7 SMS
7.1 SMS Commands
Module supports SMS PDU and SMS TEXT mode according to ETSI specifications 07.05 & 3.40.
7.1.1 +CPMS, Preferred Message Storage
This command handles the selection of the preferred message storage area. The message storage area
is divided into three parts, mem1, mem2 and mem3.
Command
Syntax
Response/Action
Remarks
Set
+CPMS=<me
m1>[,<mem2
>[,<mem3>]]
+CPMS:
<used1>,<total1>,<used2>,<total2>,
<used3>,<total3>
OK
or:
+CMS ERROR: <err>
The Set command
sets the memory
storage.
Read
+CPMS?
+CPMS:
<mem1>,<used1>,<total1>,<mem2
>,<used2>,<total2>,<mem3>,<used
3>,<total3>
OK
or:
+CMS ERROR: <err>
The Read command
displays the selected
memory storage type
for the three memory
areas.
Test
+CPMS=?
+CPMS: (list of
supported<mem1>s),(list of
supported <mem2>s),(list of
supported <mem3>s)
OK
or:
+CMS ERROR: <err>
The Test command
lists the supported
memory storage for
<mem1>, <mem2>
and <mem3>.

Fibocom G510 Specifications

General

Brand	Fibocom
Model	G510
Category	Modem
Language	English