Fibocom G510 - Supplementary Services; CSSN, Supplementary Service Notifications

G5/G6-Family AT Commands User Manual Page
65
of
243
OK
AT+CLCC
+CLCC: 1,0,0,0,0,"01256316830",129,
OK
AT+CLCC?
+CLCC: 0
OK
AT+CLCC=1 //Example with unsolicited indication
OK
ATD055490698;
OK
+CLCC: 1,0,2,0,0,"055490698",129,
+CLCC: 1,0,3,0,0,"055490698",129,
OK
+CLCC: 1,0,0,0,0,"055490698",129,
ATH
NO CARRIER
OK
+CLCC: 1,0,6,0,0,"055490698",129,
5.3 Supplementary Services
This set of commands enables control over supplementary service notifications, including Structured and
Unstructured Supplementary Service Data (USSD) data.
5.3.1 +CSSN, Supplementary Service Notifications
This command handles the enabling and disabling of supplementary service-related, network-initiated,
notifications.
Command
Syntax
Response/Action
Remarks
Set
+CSSN=[<
n>[,<m>]]
OK
or:
+CME ERROR:
<err>
The Set command enables/disables the display of
notification result codes to the TE.
When <n>=1 and a supplementary service
notification is received after a mobile-originated call
setup, the +CSSI: notification is sent to the TE
before any other mobile-originated call setup result
codes. When several different notifications are
received from the network, each of them receives
its own +CSSI result code.
When <m>=1 and a supplementary service