Fibocom G510 - Page 64

G5/G6-Family AT Commands User Manual Page
64
of
243
The default value is 0.
<idx>
Integer type, call identification number
<dir>
0 Mobile originated call (MO)
1 Mobile terminated call (MT)
<call state>
The state of the call
0 Active
1 Held
2 Dialing (MO call)
3 Alerting (MO call)
4 Incoming (MT call)
5 Waiting (MT call)
6 Released
<mode>
Bearer/Teleservice
0 Voice Call
<mpty>
Multiparty status
0 Call is not part of a multiparty call
1 Call is one of multiparty call parties
<number>
Phone number in the format specified by <type>.
Contains a string of up to 32 characters.
<type>
Phone number display format.
Type of address octet in integer format (refer to GSM 04.08 [8] subclause
10.5.4.7)
161 Local number
145 International number with access character +
Note: When a mobile-originated call is routed to PSTN (PABX), no ALERT indication is prompted.
Example:
AT+CLCC=?
+CLCC: (0-1)