Fibocom G510 - Page 63

G5/G6-Family AT Commands User Manual Page
63
of
243
or:
+CME ERROR: <err>
Execute
AT+CLCC
+CLCC:
<idx>,<dir>,<call
state>,
<mode>,<mpty>,<
number>,<type>[,<
alpha>]
[<CR><LF>
+ CLCC:
<idx>,<dir>,<call
state>,<mode>,<m
pty>,<number>,<ty
pe>[,<alpha>]
[…]]
OK
The Execute command enables the
receiving of data about current calls.
Read
AT+CLCC?
+CLCC: <state>
OK
or:
+CME ERROR
<err>
The Read command returns the call
status.
Test
AT+CLCC=?
+CLCC: (List of
supported
<state>s)
OK
or:
+CME ERROR
<err>
The following table shows the +CLCC parameters.
<Parameter>
Description
<state>
0 Disable CLCC unsolicited indication
1 Enable CLCC unsolicited indication