Fibocom G510 User Manual

G5/G6-Family AT Commands User Manual Page
61
of
243
16 "Normal call clearing"
17 "User busy"
18 "No user responding"
27 "Destination out of order"
31 "Normal, unspecified"
<call_id>
Index of the call id (same as <idx> in +CLCC command)
0 All calls (default).
1-7 Specific call id.
Example:
AT+MHUP=?
+MHUP: (1,16,17,18,27,31),(0-7)
OK
AT+MHUP = 16,3 //Hung up call #3, and send cause "Normal call clearing"
OK
AT+MHUP = 17 //Hung up all calls, and send cause "User busy"
OK
AT+MHUP = 17,0 //Hung up all calls, and send cause "User busy"
OK
5.2 Call Status Messages
5.2.1 +CPAS, Phone Activity Status
This command displays the current activity status of the Module; for example, call in progress, or ringing.
Command
Syntax
Response/Action
Remarks
Execute/Read
AT+CPAS
+CPAS: <pas>
OK
or:
+CME ERROR: <err>
The Execute and Read commands
return the activity status <pas> of the
Module. They can be used to
interrogate the Module.
Test
AT+CPAS
=?
+CPAS: (list of
supported <pas>s)
OK

Fibocom G510 Specifications

General

Brand	Fibocom
Model	G510
Category	Modem
Language	English