Fibocom G510 - GTSET, HEX Mode Configuration

AT Commands User Manual Page
234
of
243
>0123456789abc
OK
+MIPPUSH: 2,0
+MIPSEND: 2,0,2048
OK
13.2.4+GTSET, HEX mode configuration
Command
Syntax
Response/Action
Set
+GTSET=<future>,<value>
OK
or:
ERROR
The following table shows the +GTSET parameters related HEX mode.
<Parameter>
Description
<future>
"SENDTIME": Set the auto push timeout.
<value>
1-30 seconds
The default value is 12.
<future>
"IPRFMT" : The format of received data.
<value>
0: Received data with “+MIPRTCP:” and the data is encoded.
1: Received data only and the data are without encoded. In received
character string, Module doesn’t accede to any <CR><LF> symbol.
2: Received data with “+MIPRTCP:” and the data is without encoded. In
received character string, Module will accede to <CR><LF> before
“+MIPRTCP:”.
5: Data read mode
The default value is 0.
Example:
Opening socket 2 already.
AT+GTSET="IPRFMT",0