Fibocom G510 User Manual

G5/G6-Family AT Commands User Manual Page
130
of
243
9.1.2 +CREG, Network Registration Status
Command
Syntax
Response/Action
Remarks
Set
AT+CREG
=[<n>]
OK
or:
+CME ERROR:
<err
The Set command controls the
presentation of an unsolicited result code
and the result of the Read operation.
Read
AT+CREG
?
+CREG:
<n>,<stat>[,<lac>,
<ci>]
OK
The Read command returns the status of
the result code presentation and shows
whether the network has currently
indicated the registration of the Module.
Location information elements <lac> and
<ci> are returned only when <n>=2 and the
Module is registered in the network.
Test
AT+CREG
=?
+CREG: (list of
supported <n>s)
OK
The following table shows the +CREG parameters.
<Parameter>
Description
<n>
0 Disables the network registration unsolicited result code.
1 Enables the network registration unsolicited result code +CREG:
<stat>.
2 Enables the network registration and location information in unsolicited
reports and Read command +CREG: <stat>[,<lac>,<ci>].
The default value is 0.
<stat>
0 Not registered, and the ME is not currently searching for a new
operator to which to register.
1 Registered, home network.
2 Not registered, but the ME is currently searching for a new operator to
which to register.
3 Registration denied.
4 Unknown.

Fibocom G510 Specifications

General

Brand	Fibocom
Model	G510
Category	Modem
Language	English