G5/G6-Family AT Commands User Manual Page
Copyright
Copyright© Fibocom Wireless Inc. 2015. All rights reserved.
Without the prior written permission of the copyright holder, any company or individual is prohibited to
excerpt, copy any part of or the entire document, or transmit the document in any form.
Attention
The document is subject to update from time to time owing to the product version upgrade or other
reasons. Unless otherwise specified, the document only serves as the user guide. All the statements,
information and suggestions contained in the document do not constitute any explicit or implicit
guarantee.
Trademark
The trademark is registered and owned by Fibocom Wireless Inc.
Versions
Modify:
AT&V/AT&W/ATS24/ATO/AT+CPAS/AT+CLCC/AT+CLCK/AT+CBAUD/
AT+IPR/AT+CFUN/
Add: AT+GTGIS/AT+GTSET/AT+GTTS
1,To modify at+cgmm example
2,Modify "D>mem<n>[;]" to "D>"mem"<n>[;]"
3,Modify "+CLCK: ERROR" to "+CLCK: ERROR"
4, Add chapter 15
1, change number type 129 to 161 and 128 to 129
2,Change CDS to ODM
3,Add UART2 configuration
4,Add ERROR CODE
5, Update IPR baud rate
Some content is transferred to supplementary document