Fibocom G510 - Page 216

AT Commands User Manual Page
216
of
243
values.
Time values can
be
inserted with
resolution of 100
milliseconds.
Parameter
Description
<socket_ID>
Number of configured TCP socket (1 to 4)
<retr_num>
Number of re-transmissions (1 to 12) Default: 5
<min_TO>
Bottom limit to re-transmit timeout (100 ms to 1 sec.) Default: 5*100mS
<max_TO>
Upper limit to re-transmit timeout (1 sec. to 60 sec.) Default: 60
<max_close_delay>
Closing delay required by RFC 793 (100 ms to 7500 ms) Default: 75*100mS
<is_nack_ind_req>
NACK/ACK TCP indication feature.
Activating this parameter enables Module to report the user, in case of losing a
TCP connection, what data was received by the remote TCP layer.
0 - feature inactive.
1 - NACK indication active.
2 - ACK indication active.
• Default value - 0
This parameter resets after power cycle.
Example:
AT+MIPCONF=2,5,10,600,75,2
OK
AT+MIPOPEN=2,0,"66.249.87.99",80,0
OK
+MIPOPEN: 2,1
AT+MIPSETS=2,10
+MIPSETS: 0
OK