Fibocom G510 User Manual

G5/G6-Family AT Commands User Manual Page
90
of
243
The SC may reject messages with a TP-Protocol-Identifier containing a reserved value
or one, which is not supported.
<dcs>
One octet of Data Coding Scheme, indicates the data coding scheme of the DATA,
and may indicate a message class.
Note:
For DCS expanded information, see section “DCS handling”.
default alphabet: 00xx00xx, 111 100xx, 1 101xxxx
8 bit data: 00xx01xx, 111101xx
UCS2: 00xx10xx, 1110xxxx
reserved: 00xx11xx, 0100xxxx-1011xxxx
The default value at power-up is 0 - Default alphabet.
<Parameter>
Description
0 to 143
(TP-VP + 1) x 5 minutes (i.e. 5 minutes intervals up to 12 hours)
144 to 167
12 hours + ((TP-VP - 143) x 30 minutes)
168 to 196
(TP-VP - 166) x 1 day
197 to 255
(TP-VP - 192) x 1 week
Example:
AT+CSMP?
+CSMP: 17,167,0,0 (default values for SMS-SUBMIT)
OK
AT+CSMP= 1,256,0,0
+CMS ERROR: numeric parameter out of bounds
AT+CSMP=?
OK
AT+CSDH=1
OK
AT+CMGF=1
OK
AT+CMGW="15820447141"
> ABC (^Z)
+CMGW: 6

Fibocom G510 Specifications

General

Brand	Fibocom
Model	G510
Category	Modem
Language	English