Fluke Wavetek-Datron 395 - Page 269

send = "MC:WF? DATl"
[select 4]
display "MemC 20000pts"
This string is displayed in the 395's DSO
setup
list
send "WFSU SP,O,NP,20000,FP,O,SN,O" If selected, at"do upload" these commands
are sent to selectthe waveform source.
If selected, at "do upload" this command
transfers the waveform from the DSO to
Model395.
[select 5]
display
="MemD 500ûpts"
send = ''WFSU SP,O,NP,5000,FP,O,SN,O"
send = "MD:WF? DAT1"
This string is displayed
in the 395's DSO
setup
list
If selected, at"do upload" these commands
are sent
10 select the waveform source.
If selected, at "do upload" this command
transfer8 the wavcform from the DSO to
Mode1395.
send = "MD:WF?
DATl"
[select 7]
display ''MemD 20000pts"
[select 6]
display = "MemD
lOOûOpts" This string is displayed in the 395'8 DSO
setup
list
send = "WFSUSP,O,NP,I0000,FP,O,SN,O"
send= "MD:WF? DATl" If selected, at "do upload" this command
transfers the waveform from the DSO to
Mode1395.
This string is displayed in the 395
DSO
setup list
send = "WFSUSP,O,NP,20000,FP,O,SN,O" If selected, at "do upload" these commands
are sent to select the waveform source.
If selected, at "do upload" this command
transfers the waveform from the DSO to
Mode1395.
F-12 osa Upload·
[select 8]
display = "MemD AlI pts"
send= "WFSU
SP,O,NP,O,FP,O,SN,O"
send= "MD:WF? DATl"
[format]
size=2
dsize 16
dsign= 1
counLtype 5
order=msb
format= <count><data>
This string is displayed in the 395
DSO
setup list.
If selected, at "doupload" these commands
are sent to selectthe waveform source.
If selected, at "do upload" this command
transfers the waveform from the
DSO to
Mode1395.
Model 395 expects 2 bytes/point.
Model395 expects 16-bit data.
Model395 expects signed
2's complement
data.
The Model 395 expects the data in 488.2
Definite Length Arbitrary Block Data
format.
Model 395 expects MSB frrst.
Model 395 reads the count bytes and data
bytes.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com