EasyManua.ls Logo

Fuji Xerox Versant 80 Press

Fuji Xerox Versant 80 Press
1019 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Paper Jams
857
Problem Solving
22
When the HCF B1-S or the High Capacity Feeder C3-DS is installed
1) Open the front door of the High Capacity Feeder.
2 Open the bottom left door while gripping the
release handle.
3 Remove the jammed paper at the top.
Note If paper is torn, check for any torn pieces of
paper inside the machine.
4 Remove the lower jammed paper if there is.
Note If paper is torn, check for any torn pieces of
paper inside the machine.
5 Close the bottom left door.
Note A message will be displayed and the machine will not operate if the bottom left door is even slightly
open.
6 When the following option is installed, perform the following.
When the HCF B1 is installed
1) Slowly return the HCF B1 to its original position.
When the HCF B1-S or the High Capacity Feeder C3-DS is installed
1) Close the front door of the High Capacity Feeder.

Table of Contents

Related product manuals