22 Problem Solving
858
Problem Solving
22
Note • A message will be displayed and the machine will not operate if the HCF B1 is not returned to its
original position or the front door of the High Capacity Feeder is even slightly open.
Paper Jams in the Bottom Right Door
1
When the following option is installed, perform the following procedure before opening the
bottom right door. If not, proceed to step 2.
When the C3 Finisher or the C3 Finisher with Booklet Maker is installed
1) Make sure that the machine has stopped,
and open the front door of the Transport
Unit V1.
2) Pull the handle [1a] to the right.
When the Interface Module is installed
1) Make sure that the machine has stopped,
and open the front door of the Interface
Module.
2 Open the bottom right door while sliding the
door latch downwards.
To Next Page
Loading...
