23 Appendix
924
Appendix
23
Stacker
Capacity
Note
z
When using
FX P Paper.
Output Tray 500 sheets
Finisher Tray
(with no staple)
A4 : 2,000 sheets
B4 or larger: 1,500 sheets
Mix stack: 350 sheets
*
Important •
*
When larger size papers are loaded on smaller
size papers.
Finisher Tray
(with staple)
A4 : 200 sets or 2,000 sheets
B4 or larger: 100 sets or 1,500 sheets
Booklet Tray 20 sets
Important • In case of center binding, 15 sheets/set
• For 16 sheets/set, up to 15 sets.
• Some papers may not be placed into tray
depending on the Paper Weight.
Staple Capacity 100 sheets
Important • When using FX P Paper
• 65 sheets when using paper larger than A4 / 8.5 ×
11".
• Staples may be bent depending on the
deployment conditions such as Paper Weight.
Paper Size Standard Size:
Maximum: A3, 11 × 17"
Minimum: B5
Position <1 place>
Front: Angled stapling
Center: Parallel stapling
Rear : Parallel stapling
Angled stapling (A3 and A4 only)
<2 places>
Parallel stapling
<4 places>
Parallel stapling
Punch Number of Holes 2 or 4,
3 (optional)
Paper Size Maximum: A3, 11 × 17"
Minimum: B5 (2 holes), A4 , 8.5 x 11" (4 holes)
Paper Weight 52 - 220 gsm
Booklet
Finishing
Capacity Center binding: 20 sheets
Center folding: 5 sheets
Note • When a cover is attached, the maximum number
of sheets decreases depending on the paper
weight.
• Our customer engineers can change maximum
number of sheets for center-binding (up to 25
sheets).
Paper Size Standard size: Maximum: A3, 11 x 17"
Minimum: A4, 8.5 x 11"
Non-standard size: Maximum: 330 x 457 mm
Minimum: 210 x 279 mm
To Next Page
Loading...
