Specifications
927
Appendix
23
Squarefold Trimmer Module (optional)
Important • The Finisher D4 with Booklet is required to install the Squarefold Trimmer Module.
Finishing Transport Module (optional)
Note • FX J Paper: 82 gsm
• FX P Paper: 64 gsm
Paper Size Stacker Output Tray
Standard size: Maximum: A3, 11 x 17"
Minimum: Postcard
Non-standard size: Maximum: 330 x 488 mm
Minimum: 98 x 148 mm
Stacker Tray
Standard size: Maximum: A3, 11 x 17"
Minimum: B5
Non-standard size: Maximum: 330 x 488 mm
Minimum: 203 x 182 mm
Paper Weight Stacker Output Tray: 52 - 350 gsm
Stacker Tray: 52 - 300 gsm
Power Supply AC 100 - 240V±10%, 1.5 - 0.8A for both 50/60Hz±3%
Power Consumption 192 W or less
Dimensions Width 805 × Depth 725 × Height 1,042 mm
Weight 155kg
Paper Size Standard size: Maximum: A3, 13 x 18"
Minimum: A4, 8.5 x 11"
Non-standard size: Maximum: 330 x 457 mm
Minimum: 210 x 279 mm
Paper Weight 60 - 300 gsm
Capacity Center binding: 20 sheets
Center folding: 5 sheets
Note • Square back binding is not supported for center folding or center
binding of less than 5 sheets.
Trimming Size 2 - 20 mm
Booklet Tray Capacity 20 sets (folding 15 sheets or less), 15 sets (folding 16 sheets or more)
Power Supply AC 100 - 240V±10%, 0.8 - 0.4A for both 50/60Hz±3%
Power Consumption 96 W or less
Dimensions Width 1,072 × Depth 725 × Height 552 mm
Note • The above is the external dimension when the device is attached to
the machine. The width of the device only is 1,278 mm.
Weight 100 kg
Power supply
Power consumption
Power supply: AC 100 - 240V±10%, 5-2A for both 50/60Hz±3%
Power consumption : Maximum 500 W or less
Dimensions Width 593 x Depth 652 x Height 1,004 mm
Weight 64.5 kg
To Next Page
Loading...
