© 2011 Fujitsu Technology Solutions
189
9.3.2.3 Mirroring
Figure : Port Mirroring
Selection Criteria
Session ID - Select a port mirroring session from the list. The number of sessions allowed is
platform specific. By default the First Session is selected. Up to 1 sessions are supported.
Mode - Specifies the Session Mode for a selected session ID. The default Session Mode is disabled.
Destination Port - Acts as a probe port and will receive all the traffic from configured mirrored
port(s). Default value is blank.
Configurable Data
Source Port(s) - Specifies the source port(s) with directions as mirrored port(s). Traffic of the source
port(s) is sent to the probe port.
Up to 368 source ports can be selected per session.
Command Buttons
Add Source Ports - To add Source Port(s) to the selected session.
Remove Source Ports - To remove the configured Source Port(s) of the selected session.
Apply - Send the updated screen to the switch and cause the changes to take effect on the switch.
Delete - Remove the selected session configuration.
To Next Page
Loading...
