Fujitsu PRIMERGY BX900 - Page 434

© 2011 Fujitsu Technology Solutions
432
10.4.5.9 vtp pruning
This command uses to configure the administrative domain to permit pruning.
Syntax
vtp pruning
no vtp pruning
no - This command resets the pruning mode to default value.
Default Setting
Disabled
Command Mode
Global Config
10.4.5.10 vtp version
This command uses to configure the vtp version.
Syntax
vtp version <1-2>
no vtp version
<1-2> - version 1 or 2.
no - This command resets the vtp version to default value.
Default Setting
Default version is 1.
Command Mode
Global Config