Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua - Removing a 3.5-Inch HDD out of 5.25-Inch Dummy Cover

MX130 S2 Upgrade and Maintenance Manual 101
HDDs and accessible drives
7.8.3 Removing a 3.5-inch HDD out of 5.25-inch dummy
cover
Figure 39: Disconnecting the cables from the HDD
Ê Disconnect cables from the HDD.
1 Power cable connector P2 (see "Power cable T26139-Y4012-V211"
on page 239)
2 SATA cable T26139-Y4028-V153
Ê Close the front cage as described in section "Closing the front cage" on
page 53.
/
0