184 Upgrade and Maintenance Manual MX130 S2
Main memory
10.3 Removing memory modules
10.3.1 Required tools
● Preliminary and concluding steps: tool-less
● Removing memory modules: tool-less
10.3.2 Preliminary steps
Before removing a memory module, perform the following steps:
Ê Disable BitLocker functionality as described in section "Disabling BitLocker
functionality" on page 59.
Ê Follow all procedures described in section "Opening the server" on page 48.
10.3.3 Removing a memory module
Ê Identify the desired memory slot according to the mounting order described
in section "Memory sequence" on page 180.
V CAUTION!
Ensure to maintain an operational configuration when removing
memory modules. For additional information, please refer to section
"Operation modes" on page 181.
Upgrade and Repair Units (URU)
Average task duration: 5 minutes
To Next Page
Loading...
