188 Upgrade and Maintenance Manual MX130 S2
Processors
11.1 Basic procedure
Supported processors
– AMD FX, AMD Sempron, Athlon II, Phenom II
– Socket type: AM3+
– Thermal Design Power (TDP) class: 95W
11.2 Replacing the processor heat sink
11.2.1 Required tools
● Preliminary and concluding steps: tool-less
● Removing and installing the processor heat sink:
– Phillips PH2 / (+) No. 2 screw driver
11.2.2 Preliminary steps
Before replacing the processor heat sink, perform the following steps:
Ê Follow all procedures described in section "Opening the server" on page 48.
Field Replaceable Units (FRU)
Average task duration: 15 minutes
To Next Page
Loading...
