204 Upgrade and Maintenance Manual MX130 S2
System board and components
12.2 Trusted Platform Module (TPM)
This section provides information on how to install, remove or replace the
Trusted Platform Module (TPM).
12.2.1 Installing the TPM board
12.2.1.1 Required tools
● Preliminary and concluding steps:
– Phillips PH2 / (+) No. 2 screw driver
● Installing the TPM:
– Bit screw driver
– TPM bit insert *
*For the Japanese market:
– TPM module fixing tool (S26361-F3552-L909)
12.2.1.2 Preliminary steps
Before installing the TPM board, perform the following steps:
Ê Disable BitLocker functionality as described in section "Disabling BitLocker
functionality" on page 59.
Ê Follow all procedures described in section "Opening the server" on page 48.
Field Replaceable Units (FRU)
Average hardware task duration: 5 minutes
To Next Page
Loading...
