MX130 S2 Upgrade and Maintenance Manual 131
HDDs and accessible drives
7.17.3 Installing a backup drive in 5.25-inch chassis bay
Figure 68: Connecting the fixation plate to the 5.25-inch chassis bay
Ê Align the four pins of the fixation plate with the screw holes on the 5.25-inch
chassis bay.
Figure 69: Installing the backup drive
Ê Push the backup drive in its bay until it snaps into place.
Ê Open the front cage as described in section "Opening the front cage" on
page 52.
To Next Page
Loading...
