182 Upgrade and Maintenance Manual MX130 S2
Main memory
10.2 Installing memory modules
10.2.1 Required tools
● Preliminary and concluding steps: tool-less
● Installing memory modules: tool-less
10.2.2 Preliminary steps
Before installing a memory module, perform the following steps:
Ê Disable BitLocker functionality as described in section "Disabling BitLocker
functionality" on page 59.
Ê Follow all procedures described in section "Opening the server" on page 48.
10.2.3 Installing a memory module
Ê Identify the correct memory slot according to the mounting order described
in section "Memory sequence" on page 180.
Figure 114: Installing memory modules (A)
Ê Press out the securing clip at each end of the memory module connector.
Upgrade and Repair Units (URU)
Average task duration: 5 minutes
To Next Page
Loading...
