Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua - Replace Slimline ODD

142 Upgrade and Maintenance Manual MX130 S2
HDDs and accessible drives
7.20 Replacing slimline ODD out of slimline
chassis bay
7.20.1 Required tools
● Preliminary and concluding steps:
● Removing accessible drives: tool-less
7.20.2 Preliminary steps
Before replacing an accessible drive, perform the following steps:
Ê Disable BitLocker functionality as described in section "Disabling BitLocker
functionality" on page 59.
Ê Remove all backup and optical disk media from backup and optical disk
drives as described in section "Removing backup and optical disk media" on
page 60.
Ê Follow all procedures described in section "Opening the server" on page 48.
Ê Open the front cage as described in section "Opening the front cage" on
page 52.