Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua - Concluding Steps; Removing 5.25-Inch Dummy Cover; Required Tools; Preliminary Steps

112 Upgrade and Maintenance Manual MX130 S2
HDDs and accessible drives
7.11.4 Concluding steps
Perform the following procedures to complete the task:
Ê Follow all procedures described in section "Closing the server" on page 54.
7.12 Removing 5.25-inch dummy cover
7.12.1 Required tools
● Preliminary and concluding steps: tool-less
● Removing the dummy cover: tool-less
7.12.2 Preliminary steps
Before removing the dummy cover, perform the following steps:
Ê Follow all procedures described in section "Opening the server" on page 48.
Upgrade and Repair Units (URU)
Average task duration: 5 minutes