Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua - Install Slimline ODD

136 Upgrade and Maintenance Manual MX130 S2
HDDs and accessible drives
7.19 Installing slimline ODD in slimline chassis
bay
7.19.1 Required tools
● Preliminary and concluding steps:
– Slotted screw driver (only for removing the ODD filler cover)
● Installing accessible drives: tool-less
7.19.2 Preliminary steps
Before installing an accessible drive, perform the following steps:
Ê Disable BitLocker functionality as described in section "Disabling BitLocker
functionality" on page 59.
Ê Follow all procedures described in section "Opening the server" on page 48.
Upgrade and Repair Units (URU)
Average task duration: 10 minutes