MX130 S2 Upgrade and Maintenance Manual 199
12 System board and components
This chapter provides information on how to replace the system board and
system board components as its CMOS battery and the Trusted Platform
Module (TPM).
Safety notes
V CAUTION!
● Devices and components inside the server remain hot after
shutdown. After shutting down the server, wait for hot components to
cool down before installing or removing internal options.
● Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs).
● Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
● For further information, please refer to chapter "Important
information" on page 31.
In this chapter
● "Removing the CMOS battery" on page 201
● "Installing the CMOS battery" on page 202
● "Installing the TPM board" on page 204
● "Removing the TPM board" on page 209
● "Replacing the system board" on page 213
To Next Page
Loading...
Need help?
General