Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua - Installing the Processor

194 Upgrade and Maintenance Manual MX130 S2
Processors
11.3.5 Installing the processor
Figure 121: Installing the processor
Ê Hold the processor with your thumb and index finger. Make sure that the
indication triangle on the processor aligns with the notch on the socket.
Ê Lower the processor straight down without tilting or sliding it in the socket.
V CAUTION!
– Ensure that the processor is level in the socket.
– Be careful not to touch or bend the pins on the processor.
– Never touch the underside of the processor. Even minor soiling
such as grease from the skin can impair the processor’s operation
or destroy the processor.
– Ensure not to scrape or dent the processor edges.