Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua - Install Backup Drive

130 Upgrade and Maintenance Manual MX130 S2
HDDs and accessible drives
7.17 Installing backup drive in 5.25-inch chassis
bay
7.17.1 Required tools
● Preliminary and concluding steps: tool-less
● Removing accessible drives: tool-less
7.17.2 Preliminary steps
Before installing an accessible drive, perform the following steps:
Ê Disable BitLocker functionality as described in section "Disabling BitLocker
functionality" on page 59.
Ê Follow all procedures described in section "Opening the server" on page 48.
Ê Remove the dummy cover as described in section "Removing 5.25-inch
dummy cover" on page 112.
Upgrade and Repair Units (URU)
Average task duration: 10 minutes