Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua - Installing an Additional 3.5-Inch HDD in ODD;HDD Bracket

104 Upgrade and Maintenance Manual MX130 S2
HDDs and accessible drives
7.9.3 Installing an additional 3.5-inch HDD in ODD/HDD
bracket
Figure 42: Installing the HDD in the 5.25-inch ODD/HDD bracket
Ê Insert the HDD into the ODD/HDD bracket (1) and fasten the four
screws (2).
Figure 43: Connecting the fixation plate to the 5.25-inch ODD/HDD bracket
Ê Align the four pins of the fixation plate with the screw holes on the ODD/HDD
bracket.
/
0
0