Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua - Replacing a Slimline ODD out of Slimline Chassis Bay

MX130 S2 Upgrade and Maintenance Manual 143
HDDs and accessible drives
7.20.3 Replacing a slimline ODD out of slimline chassis
bay
Figure 79: Disconnecting cables from the ODD
Ê Disconnect all cables from the ODD.
1 Power cable connector P4 (see "Power cable T26139-Y4012-V211"
on page 239)
2 SATA cable T26139-Y4028-V102
Ê Close the front cage as described in "Closing the front cage" on page 53.
/
0