Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua - Removing an Additional 3.5-Inch HDD out of 3.5-Inch Chassis Bay

MX130 S2 Upgrade and Maintenance Manual 95
HDDs and accessible drives
7.6.3 Removing an additional 3.5-inch HDD out of 3.5-
inch chassis bay
Figure 33: Disconnecting the cables from the HDD
Ê Disonnect cables from the HDD.
1 Power cable connector P3 (see "Power cable T26139-Y4012-V211"
on page 239)
2 SATA cable T26139-Y4028-V153
/
0