Fujitsu PRIMERGY MX130 S2 Upgrade and maintenance manua - Replacing System Fan Module; System Fan Replacement Preliminary Steps

146 Upgrade and Maintenance Manual MX130 S2
System fan
8.1 Replacing the system fan module
8.1.1 Required tools
● Preliminary and concluding steps: tool-less
● Replacing the fan module:
– Side cutter / pincer
8.1.2 Preliminary steps
Before replacing the fan module, perform the following steps:
Ê Follow all procedures described in section "Opening the server" on page 48.
Ê Open the front cage as described in section "Opening the front cage" on
page 52.
Upgrade and Repair Units (URU)
Average task duration: 5 minutes