MX130 S2 Upgrade and Maintenance Manual 81
HDDs and accessible drives
● "Installing backup drive in 5.25-inch chassis bay" on page 130
● "Removing backup drive out of 5.25-inch chassis bay" on page 133
● "Installing slimline ODD in slimline chassis bay" on page 136
● "Replacing slimline ODD out of slimline chassis bay" on page 142
7.1 Basic procedure
– HDDs with different capacities are installed from lowest to highest capacity.
– HDDs with different rotation speeds are installed from lowest to highest
speed.
– Please refer to section "Mounting order" on page 82 for a complete overview
of the mounting sequence.
To Next Page
Loading...
